Smart Building Sensors by zane

Smart Industrial, Office or Residential Space

Z_CO2-Z01808 Temperature, Humidity and CO2 sensor

Features 

  • 1xAA IMR 14500 3.6V battery (2600 mAh)
  • adjustable operation interval by downlink message
  • temperature measurement (0.1’C resolution)
  • Relative Humidity measurement (1% resolution)
  • CO2 concentration measurement (PPM)
  • battery lifetime is 1-5 years depending on the intervals of measurements
  • operation parameters can be set by downlink messages 


Technical Specification

  • Frequency Band 867.1 – 868.8MHz ISM (SKU-EU) 902.000 MHz to 928.000 MHz (US)
  • Battery Specs 1xAA 3.6V battery (2600 mAh) 
  • Transmit Power +14 dBm (25 mW) (EU) up to +18.5 dBm high efficiency PA (US)
  • Receive Sensitivity -141 dBm (EU) -146 dBm (US)
  • Antenna Built-in 
  • Operating Temperature -10ºC - 50º 
  • Accuracy ±0.3°C at 5-60°C (temperature) ±2% at 20-80% (humidity)

ZTEMP LORAWAN TEMPERATURE SENSOR Z01856

Features

  • 1xAA IMR 14500 3.6V battery (2600 mAh)
  • adjustable operation interval by downlink message
  • temperature measurement resolution: 0.1’C
  • Sensor: DS18B20
  • battery lifetime is 1-5 years depending on the intervals of measurements
  • IP65 enclosure
  • operation parameters can be set by downlink messages or zTrack setup application for Windows
  • the temperature probe can be extended by cable
  • if you need longer cable please tell us the required length
  • The zTemp manufacturing default settings:
  • Parameters can be changed by our USB configuration tool (Windows application)

Technical Specification

  • Frequency Band 867,1 – 868,8MHz ISM (SKU-EU) 902.000 MHz to 928.000 MHz (US)
  • Dimensions L:65 x W:57 x H:35mm
  • Weight: 110g (without flanges)
  • Battery Specs 1xAA 3.6V battery 2600 mAh
  • Transmit Power +14 dBm (25 mW) (EU) up to +18.5 dBm high efficiency PA (US)
  • Receive Sensitivity -141 dBm (EU) -146 dBm (US)
  • Antenna Built-in
  • Operating Temperature -25ºC - 50º
  • Accuracy ±0.5°C at -10-85°C

ZTEMP LORAWAN TEMPERATURE SENSOR Z0156

Features

  • 1xAA IMR 14500 3.6V battery (2600 mAh)
  • adjustable operation interval by downlink message
  • temperature measurement resolution: 0.1’C
  • Sensor: DS18B20
  • battery lifetime is 1-5 years depending on the intervals of measurements
  • IP65 enclosure
  • operation parameters can be set by downlink messages or zTrack setup application for Windows
  • the temperature probe can be extended by cable
  • if you need longer cable please tell us the required length
  • The zTemp manufacturing default settings:
  • Parameters can be changed by our USB configuration tool (Windows application)

Technical Specification

  • Frequency Band 867,1 – 868,8MHz ISM (SKU-EU) 902.000 MHz to 928.000 MHz (US)
  • Dimensions L:65 x W:57 x H:35mm
  • Weight: 110g (without flanges)
  • Battery Specs 1xAA 3.6V battery 2600 mAh
  • Transmit Power +14 dBm (25 mW) (EU) up to +18.5 dBm high efficiency PA (US)
  • Receive Sensitivity -141 dBm (EU) -146 dBm (US)
  • Antenna Built-in
  • Operating Temperature -25ºC - 50º
  • Accuracy ±0.5°C at -10-85°C

ZDOOR Z01350

A LoRaWAN sensor is built with reed switch or dry contact input terminal to detect opening and closing of doors, windows and gates. The sensor can report if any trigger occurs. The device reports keep-alive signals. The period of this is adjustable by downlink message if needed. The range of it from 5min-1day. Operation parameters can be set by downlink messages or zTrack configuration tool for Windows. When any trigger occurs, the device sends it immediately to the LoRaWAN network by unconfirmed message. The device reports reed opening/closing events. If any trigger reports the device waits for the next attempt. The following parameters will be configurable via USB or downlink messages:

  • LoRaWAN data rate
  • Authentication mode (OTAA or ABP)
  • Message type (confirmed or unconfirmed)

Optional features :

  • Pulse counter (payload contains the pulses of a specified period)
  • Accelerometer
  • Temperature/humidity sensor

ZWATER Z01759

zWater is a LoRaWAN water sensing device, that reports to the LoRaWAN network when the resistance of the sensor drops caused by water. The device reports keep-alive messages every hour to inform the user whether it is powered and operating properly. Operation parameters can be set by downlink messages or using zTrack setup application for Windows. The device contains a piece of cotton pads

(diameter = 60mm, easy to get in any cosmetic shops). After the water alarm, the unit must be dried and the pads must be replaced before the next usage. The following parameters will be configurable via uUSB or downlink messages:

  • LoRaWAN data rate
  • Authentication mode (OTAA or ABP)
  • Message type (confirmed or unconfirmed)

Technical Specification

  • Frequency Band 867,1 – 868,8MHz ISM (SKU-EU) 902.000 MHz to 928.000 MHz (US)
  • Number of Channels Configurable 8 channels (SKU-EU)
  • Battery Specs 1xAA IMR 14500 3.6V battery (2600 mAh)
  • Transmit Power +14 dBm (25 mW) (EU) up to +18.5 dBm high efficiency PA (US)
  • Receive Sensitivity -141 dBm (EU) -146 dBm (US)
  • Antenna Built-in
  • Operating Temp 0°C to 50°C
  • Dimensions D:76 H:30mm

ZMOTION PIR SENSOR Z01758

zPir is a PIR motion detector with built-in pet immunity, based on LoRaWAN communication. It operates with 3xAAA 1.5V standard batteries. When any movement occurs in the range of the detector it reports immediately to the LoRaWAN network with a message.

Operation parameters can be set by downlink messages. Battery lifecycle is subject of the number of daily reported messages. One set of good quality battery can send more than 10000 messages. In average usage it works for several months. If any trigger reports the device waiting for the next attempt. According to LoRaWAN regulations the device is waiting the specified time for next communication.


Room load sensor 

It shows if anyone is in the room and moving, it is advanced to use to detect movement in the room.


Technical Specifications

  • Dimensions 6.5 x 12.5 x 5.2cm  
  • Weight 110g
  • Frequency Band 867,1 – 868,8MHz ISM (SKU-EU) 
  • Walk Speed 0.2m to 3.5m/s (0.6ft to 11.5ft/s)
  • Battery Specs 3xAAA 1.5V alkaline batteries
  • Transmit Power +14 dBm (25 mW) (EU) up to +18.5 dBm high efficiency PA (US)
  • Receive Sensitivity -141 dBm (EU) -146 dBm (US)
  • Antenna Built-in
  • Operating Temp. & Humidity 0°C to 50°C (32°F to 122°F) / 5 to 90% max.
  • Lens 2nd generation Fresnel lens, LODIFF® segments
  • Sensor Type Dual rectangular element

Order Online / Request More Info

Contact us

Soroush Consulting

26 rue Greuze, 75116, Paris, France

+33 (0)6 43 79 05 19